Euro Pro Carpet Cleaner SC507H User Manual

Deluxe Pro Steam Cleaner  
OWNER’S MANUAL  
Model SC507H  
120V., 60 Hz, 1550 Watts  
EURO-PRO Operating LLC  
94 Main Mill Street, Door 16  
Plattsburgh, NY 12901  
Tel.: 1 (800) 798-7398  
 
TIPS ON HOW TO USE YOUR SYSTEM  
IMPORTANT SAFETY INSTRUCTIONS  
When using your Steam Cleaner, basic safety precautions should always be  
observed, including the following:  
ALWAYS FINISH CLEANING BY WIPING DOWN THE CLEANED SURFACE  
WITH A TOWEL  
Hints  
To reduce the risk of fire, electric shock, or  
injury:  
1. Read all instructions before using your  
steam cleaner.  
2. Use the system only for its intended use.  
3. To protect against a risk of electric shock,  
do not immerse any part of the system in  
water or other liquids.  
4. Never yank cord to disconnect from  
outlet; instead, grasp plug and pull to  
disconnect.  
Refrigerator - Use the concentrator to  
The steam cleaner has many uses that  
blow away dirt in the ice machine and  
have not been mentioned. This was  
on door seals. The vapor will not dry  
meant only to give you a general idea of  
out or crack the seals as chemicals  
what can be achieved with the unit.  
often do. Can openers and other  
However, the ways in which to use the  
kitchen equipment can be easily  
Do not leave the steam cleaner plugged  
in when unattended. Unplug the electrical  
cord when not in use and before servicing  
or refilling water tank.  
Do not allow to be used as a toy. Close  
attention is necessary when used by or  
near children, pets or plants.  
Use only as described in this manual. Use  
only manufacturer’s recommended  
accessories.  
Do not pull cord, use cord as a handle,  
close a door on cord, or pull cord around  
sharp edges or corners. Keep cord away  
from heated surfaces.  
attachments and brushes are in most  
cleaned with the bristle brush to get into  
cases universal. It is most helpful to  
all the nooks and crannies. Mold stains  
always have a terry cloth towel or paper  
around door gaskets can be removed  
towel ready to use for removal of  
5. Do not allow cord to touch hot surfaces.  
Let the system cool completely before  
putting away or opening water tank  
(removing the safety cap). Wrap cord  
loosely around system when storing.  
6. Always disconnect system from electrical  
outlet when filling with water or emptying  
and when not in use. Always turn the  
safety cap slowly when opening the water  
tank . This will allow any remaining steam  
to escape gradually.  
7. Do not operate the system with a damaged  
cord or plug, or if the appliance or any other  
part of the system has been dropped or  
damaged. To avoid the risk of electric  
shock, do not disassemble or attempt to  
repair the steam cleaner. Return the  
system to EURO-PRO Operating LLC (see  
warranty) for examination and repair.  
Incorrect re-assembly or repair can cause a  
risk of electrical shock or injury to persons  
when the steam cleaner is used.  
8. Close supervision is necessary for any  
appliance being used by or near children.  
Do not leave the system unattended while  
connected to electrical outlet or when hot.  
9. Burns can occur from touching hot metal  
parts, hot water or steam. Use caution  
when draining unit after use as there may  
be hot water in the unit. Never direct steam  
at any person. The steam is very hot and  
can cause burns.  
10. Do not operate in the presence of  
explosive and/or flammable fumes.  
11. This appliance is intended only for  
household use. Follow all user instructions  
in this manual.  
with the bristle brush.  
moisture and residue. 100% white  
To clean microwaves or other small  
cotton towels work best.  
appliances use the nylon bristle brush  
You can clean the brushes with your  
for small areas.  
steam cleaner. When cleaning the  
Note: When cleaning small electrical  
bristle brushes, use a pair of pliers to  
appliances always unplug them from  
hold and blow dirt as above or place in  
outlet before cleaning. Do not direct  
the basket of your dishwasher.  
Do not use extension cords or outlets with  
inadequate current carrying capacity.  
Do turn off all controls as applicable  
before unplugging from electrical outlet.  
Do not unplug by pulling on cord. To  
unplug, grasp the plug, not the cord.  
Do not handle plug or steam cleaner with  
wet hands or operate without shoes.  
Do not put any objects into openings. Do  
not use with any opening blocked.  
ALWAYS STORE YOUR APPLIANCE  
INDOORS in a cool, dry area.  
steam into any openings of the  
appliances.  
To clean counter tops, use the bristle  
brush first in order to loosen the debris,  
then wipe with a terry cloth towel to  
finish.  
Note: Wipe with a towel immediately  
before the cleaned area dries. When  
cleaning the oven, use the bristle brush  
to clean around the elements and drip  
trays. Use the bristle brush for cracks,  
crevices, and hard to reach areas.  
Do keep your work area well lit.  
Do Not turn the appliance over or on its  
side. Never direct steam towards  
people, animals or plants.  
ORDERING SUPPLIES  
If you need to order supplies such as steam pocket towels, etc. please call  
the customer service number at 1 (800) 798-7398.  
Do not immerse the steam cleaner into  
water or other liquids. Always unplug the  
power cord from the electrical socket  
when filling the steam cleaner.  
Do NOT add cleaning solutions,  
scented perfumes, oils or any other  
chemicals to the water used in this  
appliance as this may damage the unit  
or make it unsafe for use. Use tap water  
or distilled/purified water if the tap water in  
your area is very hard.  
12. Never use any chemicals or substance  
other than tap water in the machine. Use of  
chemicals may damage the machine. Use  
of chemicals will automatically void your  
warranty.  
SAVE THESE INSTRUCTIONS  
For Household Use Only  
12  
1
Rev. 09/04D  
 
TIPS ON HOW TO USE YOUR SYSTEM  
ADDITIONAL IMPORTANT SAFEGUARDS  
Fiberglass or Stainless Steel Surfaces  
Blinds  
1. To avoid circuit overload, do not operate another appliance on the same socket  
(circuit) as the steam cleaner.  
2. If an extension cord is absolutely necessary, an extension cord rated a minimum  
of 15 ampere, 14 gage cord should be used. Cords rated for less amperage may  
overheat. Care should be taken to arrange cord so that it cannot be pulled or  
tripped over.  
Use the bristle brush. Slowly move the  
brush over the surface to be cleaned.  
The vapor will emulsify the dirt and  
grease on the surface. Follow behind  
with a terry cloth towel over the brush to  
remove excess moisture and residue.  
Tip: An old idea for polishing stainless  
steel is to wipe it down with seltzer soda  
water after it is cleaned.  
Use the nylon bristle brush to clean  
blinds. Move the brush over the  
surface, allowing enough time for the  
vapor to penetrate. Work quickly on  
PVC blinds. Test for color fastness on  
fabric blinds before using. Finish by  
wiping with a towel.  
3. Do not leave unattended when the system is connected to a power  
supply/electrical outlet.  
Automotive  
For detailing the wheels, use the  
concentrator and the bristle brush.  
Exterior windows are cleaned best by  
applying the vapor with the concentrator  
and following with a paper towel.  
To clean bicycles, use the bristle brush.  
To clean equipment, use the bristle  
brush, depending on the surface area.  
Finish by wiping down with a towel.  
Bathroom Areas  
WARNING: This appliance is equipped with a grounded,  
type 3-wire cord (3-prong plug). This plug will only fit into an  
electrical outlet made for a 3-prong plug. This is a safety  
feature. If the plug should fail to fit the outlet, contact an  
electrician to replace the outlet. Do not attempt to defeat the  
safety purpose of the grounding pin, part of the 3-prong plug.  
To clean the bathtub or shower area, use  
the bristle brush for grout, shower door  
tracks, hard to get areas and heavily  
soiled areas. The dual edge window/tile  
squeegee will be the most efficient way  
to clean the rest of the area. Allow plenty  
of time for the heat to penetrate the  
surface. This is especially helpful in the  
shower area if there is tile or grout. Wipe  
with towel.  
Removal of soap scum on tile, grout, and  
shower doors is also easier with the  
steam cleaner.  
To clean sanitary fixtures, use the  
concentrator with or without bristle brush.  
Use a terry cloth towel or paper towel to  
wipe up excess moisture and residue.  
To clean the sink and faucets, use bristle  
brush then finish by wiping with a towel.  
Artificial Plants  
Use the concentrator without a brush  
attached to blow off the dust and dirt.  
CAUTION: Always drain condensed water from hose  
before use or if unit has been left idle for a period of time. To  
drain hose, direct nozzle into an appropriate container or sink  
and depress hand grip steam trigger. Once hose has been  
drained, normal use may be resumed. Never direct nozzle  
towards people, animals or plants.  
Clothing  
A vapor cleaning system is excellent for  
removing wrinkles from fabrics. Simply  
“vaporize” the surface from a distance  
(12”-18”) The dry vapor removes  
wrinkles without leaving the fabric wet  
like ordinary fabric steamers do.  
WARNING: Your Steam Cleaner is designed to clean hard surfaces  
and upholstery that will withstand high heat. Do not use on soft plastics  
and cold glass. On surfaces that have been treated with wax or some no  
wax floors, the sheen may be removed by the heat and steam action. Do  
not use on unsealed wood. This could cause the wood grain to rise. It is  
therefore recommended to test an isolated area of the surface to be  
cleaned before proceeding.  
Nicotine and Tar  
Nicotine and tar dissolves at high  
temperatures and becomes a light  
yellow oil that has the consistency of  
sewing machine oil. When the  
nicotine/tar film is touched by steam  
pocket, it immediately dissolves and  
flows into the steam pocket towel. You  
can remove it from flat surfaces as fast  
as you can move the steam pocket over  
the surface.  
Soap Scum  
Soap scum dissolves almost immediately  
under a combination of heat and  
moisture. Rinse the surface with a small  
amount of water afterwards or go back  
over it once more with a clean terry cloth  
towel.  
Note: Soap scum sometimes will develop  
a hard surface from waterborne minerals.  
If this is the case, use the bristle brush to  
break up this surface - or spray or wipe  
first with lemon, vinegar or seltzer soda  
water to soften the minerals.  
Moving too slowly can dry out the soap  
scum and cause it to granulate on the  
surface. The surface will have a gritty  
feel. If this happens, apply vapor to the  
surface with the bristle brush again and  
re-clean.  
IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or  
any other chemicals to the water used in this appliance.  
Use regular water or distilled/purified water if the tap  
water in your area is very hard.  
Removing Wax, Tar, Etc.  
Many stains are only stuck on the  
surface of materials and can be easily  
and quickly removed by “blowing”  
excess material away from the surface  
from the side. This is accomplished by  
using the concentrator. Hold the terry  
cloth towel to the side to catch the loose  
residue as it is blown by the  
WARNING: Danger of Scalding. Please use caution when using the  
steam cleaner. The steam emitted from this opening is very hot.  
concentrator. Note: Always vacuum  
any loose residue off the surface before  
you apply vapor to it.  
Garden Furniture  
Use any of the brushes depending on the  
surface area. Work quickly when  
cleaning resin outdoor furniture. Finish by  
wiping with a towel.  
SAVE THESE INSTRUCTIONS  
FOR HOUSEHOLD USE ONLY  
2
11  
 
TIPS ON HOW TO USE YOUR SYSTEM  
GETTING TO KNOW YOUR STEAM CLEANER  
Wood, Vinyl and Marble Floors  
Spot Cleaning (Carpets)  
Use the Steam Pocket ™ to clean wood,  
vinyl and marble floors. Move the  
Steam Pocket™ across the floor as if  
you are mopping. When one side of the  
towel is soiled, turn the Steam Pocket™  
frame and use the other side. One of  
the great advantages of using our  
Steam Pocket™ is that your floor will dry  
faster than if you used a mop or other  
floor cleaning device. It is normal that  
some moisture may be left behind  
depending on how quickly you move the  
Steam Pocket™ across the floor and the  
relative heat and humidity of the room.  
Be sure to move quickly and steadily  
over wood, linoleum and vinyl flooring to  
avoid damaging the surface and  
Use the concentrator with or without the  
bristle brush. Move slowly over the soiled  
area, allowing the steam to penetrate.  
Agitate with bristle brush or clean towel.  
Dab the spot with the towel (do not rub).  
Repeat as necessary to remove stain.  
Vacuum only after the carpet has  
completely dried.  
Always test color fastness of carpet in an  
inconspicuous area before cleaning.  
If your steam cleaner fails to remove  
stubborn stains a commercially available  
carpet shampoo may be required. Do  
NOT add cleaning solutions, scented  
perfumes, oils or any other chemicals to  
the water used in this appliance as this  
may damage the unit or make it unsafe  
for use.  
removing wax.  
To Clean Waxed Floors: Use the  
Steam Pocket™ with quick strokes.  
This will cause the dirt to be removed  
but not the wax.  
Vinyl Floors: Do not allow heat to build  
up in any kind of vinyl since it can soften  
it enough to affect its texture. Work fast  
on vinyl.  
Tile Floors: Use the concentrator with  
the bristle brush. Have the Steam  
Pocket™ ready as well. Clean the grout  
between the tiles with the bristle brush.  
Remove the concentrator and bristle  
brush and attach the hose and Steam  
Pocket™. Move the Steam Pocket™  
across the floor to clean the tile and  
remove excess moisture and residue.  
14b  
a
CAUTION: Always determine  
the color-fastness of any fabric-  
especially with reds or blues - by taking a  
clean, moist, warm towel and gently  
rubbing a small area as far down on the  
back or other out of the way place on the  
furniture as possible. If color comes off  
on the towel, you may need to have the  
piece dry cleaned.  
1. Main Unit  
9. Steam Trigger  
10. Steam Trigger Lock  
11. Locking Button  
2. Handle  
3. Shoulder Strap  
4. Power “On” (Red) / Steam Ready  
(Green) Light  
5. Safety Cap  
6. Power Cord  
Window, Glass Surfaces and Mirrors  
12. Variable Steam Control  
13. Window Squeegee  
14a. Steam Pocket Frame  
14b. Steam Pocket Angle Adapter  
15. Steam Pocket Towel  
16. Extension Tubes (x2)  
17. Funnel  
Use the window squeegee. Work with  
the vapor jet on using the top to bottom  
movements. Use the squeegee with the  
vapor off to clear the water from the  
glass. To do this without leaving streaks,  
use lateral movements from the top to  
the bottom of the surface.  
7. Flexible Hose  
8. Hand Grip  
18. Concentrator  
19. Nylon Bristle Brushes (x2)  
CAUTION: When cleaning  
windows, always avoid any sudden  
changes in temperature to prevent glass  
breakage or cracks.  
Technical Specifications  
Voltage:  
120V., 60Hz.  
Power:  
1550 Watts  
Water Capacity:  
Steam Generator:  
27 US fl. oz. (800 ml.)  
Stainless Steel  
* Illustrations may differ from actual product.  
10  
3
 
FEATURES OF STEAM CLEANER  
TIPS ON HOW TO USE YOUR SYSTEM  
Water  
4. Heavy-duty crush-resistant  
Care and Maintenance  
1. Multipurpose Steam Cleaner:  
Use tap water for all your cleaning  
needs.  
hose.  
Bathrooms, kitchens, living  
areas, pet areas and  
appliances.  
If you consistently use demineralized or  
distilled water, cleaning the tank is  
unnecessary.  
However, if you live in an area with  
hard water, use de-mineralized /  
distilled water when steaming light  
colored fabrics to eliminate the  
possibility of hard water stains.  
Automotive, patio and  
windows.  
Rinsing Out the Steam Cleaner  
Normally, a periodic rinse of your steam  
cleaner will free it from deposits. This is  
recommended every 10-15 tankfulls, to  
free up any scale deposits from the tank.  
Fill the boiler with 20 oz. of water and  
shake the cleaner vigorously. Tilt the  
cleaner upside down to empty the boiler of  
water and any scale deposits.  
IMPORTANT: Do NOT add cleaning  
solutions, scented perfumes, oils or any  
other chemicals to the water used in  
this appliance. Use tap water or  
distilled/purified water if the tap  
water in your area is very hard.  
2. Lightweight & Portable  
5. Versatile, quick-change  
accessories  
Descaling Your Steam Cleaner  
If the tap water in you area contains a high  
level of calcium deposits and you have  
been using tap water to do your steam  
cleaning, you should descale your unit  
after 10-15 tankfulls.  
Efficient Work  
For vertical surfaces, wipe with a  
towel from the top down, in this  
way the dirty water will not soil  
surfaces already cleaned.  
Avoid changing brushes back and  
forth while cleaning.  
Start with the smallest brush to  
clean tight spots and corners first.  
Use a towel to wipe dirt as soon as  
possible, otherwise it will dry and  
re-adhere to the surface.  
To Descale the Steam Cleaner  
Step 1: Unplug the steam cleaner from  
the power source before you  
descale the boiler. Allow to cool  
for 15 minutes.  
Step 2: Fill the boiler with 1 part  
vinegar and 5 parts water and  
leave overnight or for a period  
of approximately 8 hours. Do  
not screw the safety/filler cap  
onto the steam cleaner while  
you are descaling the boiler.  
3. Stainless Steel Boiler:  
Non-corroding, stainless  
steel boiler. Welded  
construction.  
Do not use the steam cleaner  
while descaling solution is  
inside the boiler.  
Step 3: After the period of soaking, turn  
the steam cleaner upside down  
to empty solution from the  
boiler. Due to the fact that a  
small amount of solution will be  
left in the boiler, it is necessary  
to rinse the boiler out with clean  
water 2 or 3 times. Your steam  
cleaner is now ready for use.  
Note: When storing your unit, always  
drain any residual water in the boiler and  
do not tighten the safety filler cap onto  
the unit. Always leave the safety filler cap  
loose on the unit when not in use.  
4
9
 
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS  
Attaching the Shoulder Strap  
Components  
Using the detachable shoulder strap  
allows for greater freedom of movement  
when both hands are needed for  
various cleaning tasks. To attach the  
shoulder strap to the steam cleaner,  
simply snap the shoulder strap hooks  
onto the connecting rings on the unit  
body. See Fig. 11, 12 & 13.  
Power “On” Light (red): This light will  
illuminate when the unit is plugged into  
the 120V. wall outlet. It will then turn  
green” when the steam is ready.  
CAUTION: Read the instructions  
for “Filling the Water Tank” before  
opening the Safety Cap.  
Fig. 13  
CAUTION: Always unplug  
before filling. ALLOW UNIT TO  
COOL FOR FIFTEEN (15)  
Connecting  
points  
Fig. 1  
MINUTES BEFORE REFILLING.  
IMPORTANT: Do NOT add cleaning  
solutions, scented perfumes, oils or any  
other chemicals to the boiler in this  
appliance. Use tap water or  
Fig. 11  
distilled/purified water if the tap water  
in your area is very hard.  
Filling or Refilling Your Steam  
Cleaner With Water  
IMPORTANT: When using the  
steam cleaner with the shoulder  
strap, avoid rocking or tilting the unit  
excessively as this may cause water  
to enter the hose and be discharged  
along with the steam.  
IMPORTANT: Always insure that the unit  
is “UNPLUGGED” from the wall receptacle  
prior to initial filling or re-filling the water  
tank and has been allowed to cool for 15  
minutes. Never attempt to fill this unit  
under a water tap, always use the filling  
funnel provided.  
Fig. 2  
Fig. 12  
WARNING:Allow unit to cool  
for 15 minutes before refilling.  
When refilling the steam cleaner  
while the boiler is still hot, there is  
a risk that water will squirt back  
during filling and cause scalding.  
Extreme care should be taken  
when refilling the unit. Use  
caution when opening the Safety  
Cap as it may become hot during  
use and escaping steam can  
cause scalding.  
Step 1: Before refilling the steam cleaner,  
make sure that the unit is NOT  
plugged in and has been allowed to  
cool for fifteen (15) minutes.  
Step 2: Plug the power cord in to an electrical  
outlet and press the steam trigger on  
the hand grip to vent any residual  
steam that is in the boiler.  
Step 3: Remove the power cord from the  
electrical outlet.  
Step 4: Place the unit on a flat, stable  
surface. Slowly turn the safety filler  
cap counter clockwise until it is  
removed.  
Step 6: Connect desired attachments  
onto the end of the hand grip.  
Step 7: Plug the unit into a standard  
(120 volt, grounded) wall  
Step 5: Insert the funnel into the tank  
opening and add 27 US fl, oz.  
(800 ml) of water. (Fig. 2) Place the  
funnel in the tank opening as  
receptacle. Allow approximately  
8-10 minutes for vapor to reach  
its working temperature and  
pressure. When the unit is ready  
for use, the red light will change  
to green. Always point nozzle  
outlet in a safe direction. At the  
start, some water will come out  
from the nozzle. This is normal.  
NOTE: When the steam cleaner has run  
out of water, steam output will  
cease.  
illustrated in Fig. 1. The funnel has  
been specially designed to show  
when the water tank is full. When  
water starts to come out of the vent  
hole of the funnel, the tank is full.  
Remove the funnel slowly and let the  
remaining water in it to go inside the  
water tank. Do Not Overfill. Replace  
the Safety Cap.  
8
5
 
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS  
Using the Trigger Lock  
• Air dry the towel. Do not put in a clothes  
3. Bring the velcro strips  
that are on the  
Locking Button  
The steam cleaner has a steam trigger  
lock. The steam trigger will lock when  
you have pushed it all the way in.  
(Fig. 3)To unlock the steam trigger, just  
press it in the other direction. If you  
want to have continuous steam,  
dryer as high heat will cause the towel to  
shrink and the microfibers to break down.  
• If you wash your towel on a regular basis  
and don’t let them get too dirty, they will  
last much longer. As with any fabric, dirt  
particles, grease and other contaminants  
can cause the fibers to break down,  
back side of the  
steam pocket towel  
over the steam pocket  
frame and attach to  
the inside of the  
front side of the  
steam pocket towel.  
(Fig. 10)  
NOTE: When replacing the steam pocket  
towel, make sure that the steam pocket  
frame has been allowed to cool before  
removing or attaching a new steam  
pocket towel.  
Hand Grip  
Fig. 6  
Fig. 5  
depress the steam trigger and then  
push in the steam trigger lock.  
Fig. 10  
therefore regular cleaning will help  
preserve your microfiber towels.  
NOTE: Fit the steam pocket frame with  
the angle adapter onto the extension  
tube.  
Step 2. If the angle adapter is not  
attached to the steam pocket  
frame, attach as follows: Hold  
the steam pocket frame in one  
hand and the  
• As you use the microfiber towel, you will  
notice that sometimes a thread will loosen  
or pull out. This is normal and you should  
NEVER PULL AT THE LOOSE THREAD!  
Pulling the thread can cause the weave to  
come undone. Instead, simply trim the  
thread with a pair of sharp scissors.  
Fig. 3  
Care & Maintenance of the Steam  
Pocket Towel  
Due to the unique cleaning ability of this  
cloth, proper care of your microfiber towel is  
required to ensure long life and continued  
cleaning ability.  
angle adapter in the  
other. Insert the  
angle adapter  
stem into the  
opening of the  
steam pocket  
frame as shown in  
WARNING: This appliance is  
under pressure. After every use,  
unplug the unit and press the  
steam trigger button until all  
pressure has been released  
before removing safety cap.  
Allow unit to cool for fifteen (15)  
minutes before refilling.  
Attaching the Accessories to the  
Flexible Steam Hose  
Allow the unit to cool for 15 minutes  
before changing accessories.  
Fig. 7  
• The first thing you should do when  
you get a new microfiber towel is to  
wash and dry it. During the manufacturing  
process the fabric has a tendency to  
become flat as it picks up contaminants  
from the air and machinery. There will  
also be a number of loose threads that,  
while they cause no harm, can be  
annoying the first time you use the towel.  
• To clean the towel, simply wash it in your  
washing machine using the warm water  
setting.  
• Always wash your towels separately from  
other fabrics. They have a tendency to  
pick up lint and other particles from other  
fabrics and the next time you use your  
towel, this lint will transfer to the surface  
being cleaned.  
ONLY USE LIQUID DETERGENTS, never  
use dry detergents as many times the  
granules do not fully dissolve and become  
trapped in the towel. This can scratch the  
surface that you are cleaning.  
NEVER USE BLEACH OR FABRIC  
SOFTENERS! Bleach will damage the  
microfiber fabric and fabric softeners  
deposit a coating on the microfiber fabric  
that will not allow the cloth to clean  
efficiently.  
Window Squeegee  
Fig. 7. Note that the flat on the  
nozzle must face toward the  
side of the frame with the brass  
pin. Once inserted, rotate it 90°  
Step 3. Insert the electrical power cord  
into the outlet. Heating time is  
approximately 8-10 minutes with  
cold water. Filling the steam  
generator with hot water will  
shorten the heat up time.  
This attachment is very useful for  
cleaning large windows, plastic material,  
ceramic, tiled or marble surfaces.  
Using the Variable Steam  
Feature  
Your steam cleaner has a variable  
steam feature that allows you to adjust  
the steam flow to the job that you are  
doing. The variable steam control is  
located on the handgrip. To increase  
the steam flow, turn the knob counter  
clockwise and to decrease, turn it  
clockwise. (Fig. 4)  
IMPORTANT: When cleaning  
windows, always avoid any sudden  
changes in temperature to prevent glass  
breakage or cracks.  
To use: Connect the tile  
squeegee to the hand  
grip or use with  
Attaching the Steam Pocket Towel  
to the Frame  
extension tube for  
hard to reach surfaces.  
Apply steam abundantly, rub with the  
soft spongy edge, then remove excess  
water and dirt with the glass wiping  
edge.  
WARNING: Always insure the  
unit is “UNPLUGGED” from the  
wall receptacle prior to attaching  
or removing accessories.  
Fig. 4  
1. Slide the steam  
pocket towel over  
the steam pocket  
frame. (Fig. 8)  
Concentrator  
Using Your Steam Cleaner with  
Steam Pocket  
Step 1: Connect one of the extension  
tubes to the hand grip on the  
flexible steam hose. To  
Attach the concentrator  
to the handgrip or to the  
extension tubes.  
Nylon Bristle Brush (x2)  
It is best for cleaning grout in-between  
the ceramic and marble tiles.  
To use: Attach the nylon  
bristle brush on to the end  
of the concentrator, which  
then may be used directly  
on the hand grip or with extension  
tubes.  
Fig. 8  
2. Bring the towel all  
the way to the top  
of the steam  
pocket frame.  
(Fig. 9)  
attach the extension tubes  
one onto the other or onto the  
hand grip, press the locking  
button ensuring that it fits into  
the hole. (Fig. 5, Fig. 6) To  
disconnect, repeat the  
operation by pressing the  
locking button and pulling the  
two sections apart.  
Fig. 9  
6
7
 

Craftsman Saw 31521211 User Manual
Crane Humidifier EE 8064 User Manual
Crate Amplifiers Musical Instrument Amplifier KX 160 User Manual
Curtis Coffee Grinder GSG 3BLK User Manual
Delta Electronics Power Supply Series DNS User Manual
Dual Speaker DC265 User Manual
Extron electronic Stereo Amplifier P 2 DA12 Series User Manual
FEIN Power Tools Grinder Belt Grinder User Manual
Garmin Computer Monitor 906 2000 00 User Manual
GE Air Conditioner AZ41E12EAC User Manual